The Vein Runner II hydraulic jumbo drill, a single-boom hydraulic rig, is designed for drilling vertical, horizontal and angled holes in underground production or development headings. The Vein Runner II has boom coverage of 5.1 m by 5.77 m (16' 9" by 18' 11") and inner and outer turning radius’ of 3.05 m (10’0”) and 5.08 m (16’8”), respectively.
The Vein Runner II features the Intelsense drilling control system, which includes the following features:
- Collaring
- Anti-jamming
- Automatic water monitoring with feed return if low pressure is encountered
- Auto return to start position after hole completion
- Control levers for operating percussion, rotation, and feed
The Vein Runner II also includes robust drilling and carrier hydraulics that feature variable displacement piston pumps; specifically:
- Jumbo hydraulics: load-sensing, closed-circuit design for percussion, rotation, feed, and boom movements
- General hydraulics: load-sensing, closed centre circuit design for optimal efficiency
- Steering hydraulics: load-sensing, closed centre circuit design; stick steering with direct-acting control valve and two double-acting steer cylinders
Our ROPS/FOPS-certified, environmentally controlled operator’s cab uses advanced air filtration and a climate control system to insulate your operator from particulate matter and other harmful emissions. Noise is reduced significantly through the use of integrated insulation throughout the cab structure; in addition, vibration dampeners isolate the cab from the frame, ensuring a safe and comfortable ride.
| Weight |
10,955 kg |
24,100 lbs. |
| Maximum width |
1.42 m |
4 ft. 8 in. |
Turning radius
Inside
Outside |
3.05 m
5.08 m |
10 ft.
16 ft. 8 in. |
| Turning angle |
40º |
40º |
| Boom guide rollover |
360º |
360º |
| Boom extension |
914 mm |
36 in. |
| Feed extension |
1219 mm |
48 in. |
Boom coverage
Height
Width |
5.1 m
5.77 m |
16 ft. 9 in.
18 ft. 11 in. |
| Drifter |
Montabert HC 50 (2) |
| Tires |
10.00 x 20 |
| Cable reel - type G-GC |
76.2 m |
250 ft.
|
Montabert drifters
Our industry-leading Montabert drifters mean you receive the best possible drifter for your drill rig. Montabert HC series drifters have consistently, over the years, provided the lowest-per-drilled meter costs as compared to other drifters on the market.
Montabert drifters are known for:
- Longest maintenance intervals, resulting in highest availability
- Lowest maintenance costs
- Reliability
- Faster drilling speeds
- Lowest tool consumption
- Easiest to operate
- Highest penetration rates
- Lowest noise level
Montabert drifters provide maximum shock wave transmission; piston shape improvements mean that most of the shock energy goes directly to the bit, without tool fatigue. In addition, Montabert drifters excel in energy recycling; rebound energy is re-injected in the supply circuit, allowing the rebound energy to be used for the next cycle.
The HC-50 drifter is ideal for small headings and bolting application and is designed to reduce the lead length of the feed.
- Hole range: 45 to 76 mm
- Percussion output power: 13 Kw
- Blows per minute: 3750
The HC-109 drifter is ideal for production and development drilling and is designed for both underground and surface applications.
- Hole range: 45 to 102 mm
- Percussion output power: 18 Kw
- Blows per minute: 2900
The HC-110MT drifter is ideal for production and development drilling and is designed for both underground and surface applications.
- Hole range: 51 to 89 mm
- Percussion output power: 33 Kw
- Blows per minute: 4400
- 3.7 kW (5 HP) air compressor
- 2.2 kW (3 HP) water pump
- Engine options:
- Deutz BF4L914 or BF4M2012C Tier II EPA certified
- Cummins QSB 4.5 Tier III EPA, MSHA, and CANMET certified
- Cab (ROPS/FOPS certified) with climate control
- Telescopic canopy (ROPS/FOPS certified)
- Feed lengths:
- MTF 10 steel and hole
- MTF 12 steel and hole
- MTF 14 steel and hole
- Fire suppression system
- Water booster