The 1900XPC electric mining shovel, with a nominal payload of 18 mt (20 st), is proven in heavy-duty and severe-duty mining applications.
Working ranges
|
Height of cut
|
13.0 m
|
42 ft. 6 in.
|
|
Radius of cut
|
17.8 m
|
58 ft. 6 in.
|
|
Dumping height (door open)*
|
8.2 m
|
27 ft. 0 in.
|
|
Floor level radius
|
11.6 m
|
38 ft. 0 in.
|
|
Tail swing radius
|
7.0 m
|
23 ft. 0 in.
|
|
Operator eye level
|
7.4 m
|
24 ft. 3 in.
|
* Height shown with ball-type dipper. Heights will be greater with bail-less or compact-bail dippers. Actual dumping height can be greater than door clearance height.
Capacity
|
Nominal payload*
|
18 mt
|
20 st
|
|
Nominal dipper capacity*
|
10.7 m3
|
14 yd3
|
|
Range dipper capacity
|
7.5 to 19.1 m3
|
10 to 25 yd3
|
|
Rated suspended load
|
37.2 mt
|
41 st
|
* Payload and dipper capacity are dependent on many factors. Contact us for an analysis of your specific application.
Overall dimensions
|
Width
|
8.05 m
|
26 ft. 6 in.
|
|
Length
|
10.36 m
|
34 ft. 0 in.
|
|
Height over gantry
|
10.11 m
|
33 ft. 2 in.
|
|
Width of crawler shoes
|
1,066 mm
1,219 mm
|
42 in.
48 in.
|
|
Width of crawlers (42")
|
6.71 m
|
22 ft. 0 in.
|
|
Length of crawlers
|
7.62 m
|
25 ft. 0 in.
|
|
Ground clearance
|
0.53 m
|
1 ft. 9 in.
|
|
Height: ground to bottom of counterweight slabs
|
2.24 m
|
7 ft. 4 in.
|
Advanced control technology
Advanced control technologies include the following:
- Temperature monitoring system for all DC motors, drum shaft bearings, and shipper shaft bearings
- Drive programming and analysis software
- Control logic software
- I/O device monitoring and fault detection
- Remote health management
- Extended speed range in hoist and crowd
- Automatic Boom Soft Setdown (ABSS) and Boom Profile Protection Envelope to help prevent excessive loading to the attachment during operation
- Anti-swing-in-bank system to reduce excessive side loading on handle and attachment
- Hoist, crowd, and retract limits
- Automatic lubrication and compressed air systems control