The LT-1051 hard rock loader, with a rated load capacity of 10,000 kg (22,000 lbs.), is ideal for medium-size openings for both load-and-carry and truck-loading applications. The LT-1051 is perfect for height-restricted areas and can be equipped with an optional ejector bucket. The LT-1051, like all Joy underground mining loaders, is designed specifically for ease of use and maintenance, with simple operation gauges and a rugged long-life structure, providing the lowest possible total costs of operation including low capital costs.
Designed for safe operation and maintenance
The LT-1051 includes multiple features that are designed to maximize safety for both the operator and the maintenance staff:
- ROPS/FOPS canopies and cabins provide protection from falling rock or rollovers
- Fail-safe braking system features a spring-applied braking system that activates when low hydraulic oil pressure or electrical failures are detected
- Operation interlocks prevent accidental machine activation
- Three-point mounting and anti-slip steps minimize slips and falls
- Hot component isolation to prevent burns
Designed for reliability
The LT-1051 has been designed for reliability and long component life, including the following features:
- Rugged steel frame
- MIL (military specification) components that meet international standards
- Heavy-duty all-mechanical powertrain featuring Dana components for a rugged platform and long service life
- Hydraulic systems with piston pumps
- Severe-duty electrical system
- Collet-style pins for lower wear and reduced maintenance
Designed for ease of maintenance
The LT-1051 includes several key features that reduce maintenance times and costs, including:
- Ground-level maintenance design to eliminate climbing
- Centralized lubrication system
- Simple mechanical design
Designed for productivity
The LT-1051 has been designed to provide the highest possible productivity in its class:
- Combines power and efficiency to provide fast tramming speeds and cycle times, with impressive breakout power
- Easy-to-use controls are simple to train and simple to operate
- Rugged structures and heavy-duty components increase equipment uptime
Designed for customization
The LT-1051 has many options available, including:
- FOPS/ROPS certified enclosed operator’s cab with air conditioning and/or heat
- Automatic lubrication system
- Ejector bucket
- Fire suppression system
- Radio remote control
- Spare rim
Forks and an optional quick-attach coupler (which allows the bucket to be quickly replaced with forks) are available for utility applications. The buckets can be equipped with a variety of wear packages, depending on the application.
Capacities
Tramming capacity
|
10,000 kg
|
22,000 lbs.
|
Hydraulic breakout force lift
|
20,154 kg
|
44,433 lbs.
|
Hydraulic breakout force tilt
|
15,698 kg
|
34,609 lbs.
|
SAE breakout force
|
17,434 kg
|
38,435 lbs.
|
SAE static tipping load
|
33,299 kg
|
73,411 lbs.
|
Bucket
|
4.6 m3
|
6.0 yd3
|
Overall dimensions
Height to top of canopy
|
2,447 mm
|
8 ft.
|
Tramming length
|
9,476 mm
|
31 ft. 11 in.
|
Length: rear axle to bumper
|
3,060 mm
|
10 ft.
|
Centre hinge to rear axle
|
2,030 mm
|
7 ft. 6 in.
|
Centre hinge to front axle
|
1,591 mm
|
5 ft. 2 in.
|
Reach
|
1,728 mm
|
5 ft. 8 in.
|
Height to top of hood
|
1,901 mm
|
6 ft. 3 in.
|
Height: ground clearance
|
423 mm
|
1 ft. 5 in.
|
Height: dump clearance
|
1,471 mm
|
4 ft. 10 in.
|
Height: bucket pin
|
3,138 mm
|
10 ft. 3 in.
|
Height: bucket raised
|
4,978 mm
|
16 ft. 4 in.
|
Width overall
|
2,685 mm
|
8 ft. 9 in.
|
Maximum width RF
|
2,201 mm
|
7 ft. 3 in.
|
Outside radius
|
6,765 mm
|
R 22 ft. 2 in.
|
Inside radius
|
3,468 mm
|
R 11 ft. 5 in.
|
Turn angle
|
42.5 degrees
|
Dump angle
|
45 degrees
|
Roll back angle
|
47 degrees
|